What Makes the Peak 200A Lithium Battery a High-Performance Power Solution?

What is a Peak 200A Lithium Battery? The Peak 200A Lithium Battery is a 12V/200Ah lithium iron phosphate (LiFePO4) battery designed for high-current applications. It features a built-in Battery Management System (BMS) for safety, delivers up to 150A peak current, and weighs 50% less than lead-acid alternatives. Ideal for solar storage, marine, and off-grid systems.

RG72180

How Does the Peak 200A Lithium Battery Compare to Lead-Acid Batteries?

The Peak 200A Lithium Battery outperforms lead-acid batteries in energy density, cycle life, and weight. With a 3,000–5,000 cycle lifespan (vs. 300–500 cycles for lead-acid), it maintains 80% capacity after 2,000 cycles. Its LiFePO4 chemistry ensures thermal stability, reducing fire risks even under high loads.

Practical comparisons reveal stark differences in real-world performance. While a 100Ah lead-acid battery typically provides 50Ah usable capacity due to depth-of-discharge limitations, the Peak 200A delivers full 200Ah availability. Weight savings are particularly notable in mobile applications – at 58 lbs versus 130 lbs for equivalent lead-acid models, it reduces vehicle payload by 55%. Charging efficiency further separates these technologies:

What Safety Features Are Integrated Into the Peak 200A Lithium Battery?

The battery includes a multi-layered BMS with short-circuit, overcharge, and temperature protection. Unlike traditional batteries, it automatically cuts off power during voltage extremes (-20°C to 60°C operation range). The flame-retardant casing and prismatic cell design prevent leaks and swelling.

RG96100

Which Applications Benefit Most from the Peak 200A Lithium Battery?

Key applications include solar energy storage (compatible with 5kW systems), marine propulsion (supports trolling motors up to 24V), RV power systems (8–10 hours runtime for 1,000W inverters), and telecom backup (72-hour runtime for 500W loads). Its vibration resistance suits mobile installations.

Marine users particularly benefit from the battery’s saltwater corrosion resistance and maintenance-free operation. For solar installations, the 98% daily depth of discharge enables smaller battery banks – a 4-unit 48V configuration can store 9.6kWh versus 14kWh needed with lead-acid. Off-grid cabins using this battery report 30% reduction in generator runtime due to faster solar recharge capabilities. Industrial applications leverage the high discharge rate – it can power 5,000W welding equipment for 15 minutes through 250A bursts, a feat impossible with traditional AGM batteries.

How to Optimize Charging for the Peak 200A Lithium Battery?

Use a LiFePO4-specific charger (14.2–14.6V absorption voltage). At 0°C, charge rates drop to 0.2C (40A max). For solar systems, pair with MPPT controllers supporting lithium profiles. Avoid continuous float charging—the BMS enables 100% depth of discharge without capacity loss.

What Are the Environmental Advantages of Lithium Iron Phosphate Batteries?

LiFePO4 batteries contain no toxic lead or cadmium. The Peak 200A model uses 98% recyclable materials and produces 60% fewer CO2 emissions during manufacturing compared to NMC batteries. Its 10-year lifespan reduces replacement waste by 80% versus lead-acid systems.

“The Peak 200A’s modular design allows scalable configurations up to 48V/800Ah without parallel balancing issues. Its low self-discharge rate (3% monthly) makes it superior for seasonal applications. We’ve tested 1,500 cycles at 1C discharge with <10% capacity drop." — Redway Energy Storage Solutions Team

FAQ

Can this battery power a 3,000W inverter?

Yes—two 12V 200Ah batteries in series (24V) support 3,000W loads at 125A continuous draw.

Is external cooling required for high-current use?

No. The BMS enforces thermal throttling at 55°C, reducing current by 20% per 5°C increase beyond threshold.

What certification does the Peak 200A hold?

UN38.3, IEC 62619, and CE certifications ensure global compliance for transport and safety.